Helpful & Friendly AdviceCall: 01275 400456
Combination Drinking Fountain (WRAS Approved Tap and Bottle Filler) Combination Drinking Fountain (WRAS Approved Tap and Bottle Filler)

Combination Drinking Fountain (WRAS Approved Tap and Bottle Filler)

Product Code: WH-DFBF

Wall hung combination drinking fountain and bottle filler. WRAS approved bubbler and swan neck bottle filler
£286.80 inc VAT£239.00 ex VAT

£286.80 inc VAT£239.00 ex VAT

Drinking Fountain With Bottle Filler

Product Code WH-DFBF

Stainless steel wall mounted drinking fountain with both a WRAS approved drinking water tap and a WRAS approved swan neck bottle filler. The combined bottle filler and drinking fountain is supplied with a rounded front safety edge and concealed wall bracket for safety and vandal resistance. This WRAS approved taps ensure that you will meet the requirements of the water byelaws.

The wall mounted design incorporates both a drinking water tap and swan neck bottle filler to ensure both point of use drinking water is available and the ability to refill water bottles for consumption later. With the focus on plastic waste this combined unit offers a practical solution to cut down on single use water bottles.

Manufactured from 1.6mm thick grade 304 stainless steel for extra vandal resistance and durability with no sharp edges or corners for safety. Supplied with a concealed wall mounting bracket for vandal resistance and a 32mm waste fitting.

Dimensions & Specifications:

Width: 305mm.
Depth: 350mm from wall.
Height: 150mm plus 75mm rear upstand.

Material: Grade 304 stainless steel, 1.6mm thick.

Bubbler tap: WRAS approved bubbler tap

Bottle filler: WRAS approved swan neck bottle filler

Recommended Mounting Heights For Drinking Fountains:

Adult: 900 to 915mm.
Junior: 762mm.
Infant: 690mm.
Secondary: 860mm.

Supplied With:

Fixings: Integral wall fixing brackets.
Waste: 32mm flush grated waste fitting.
Tap: WRAS approved chrome plated bubbler tap with shielded nozzle and self closing valve. Integral water flow adjuster and 15mm water pipe compression coupler.
Filler: WRAS approved chrome plated swan neck bottle filler with self closing valve. 1/2" threaded connection.


In stock, usually delivered 1 to 3 working days.

**All pictures shown are for illustration purpose only and may be subject to change without notice. Actual product may vary due to product enhancement.
All dimensions shown are for guidance only and may be subject to change or alteration without notice. All items manufactured or purchased separately from a third party to fit our products should be checked against the actual dimensions of the physical product before purchase. We will not be liable for third party costs and consequential loss associated with the items not fitting third party components.**


Usually 1 to 2 working days.

Delivery Times

Delivery times stated on the website are indicative of the average time it takes to deliver each product. All delivery times are based on working days and do not include weekends or Bank Holidays.
For remote areas sometimes deliveries may take a little longer than specified.
We will contact you if there are any known delays in the delivery times on your order.

Delivery Method

All orders are despatched by the most suitable and economic method.
If you have ordered several items they may arrive separately to make sure they are delivered by the quickest and most appropriate method, and to guarantee you get the best prices.
Please note our carriers do not offer fixed time slots, and due to time constraints are not able to telephone before delivering.